614704, Amana Carbide Tipped Combination Ripping and Crosscut 14 Inch Dia x 70T 4+1, 15 Deg, 1 Inch Bore
Where one blade must do almost everything ripping and crosscutting hardwood and softwood, cutting plywood this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved chip ejection.
Specifications:
- (D) Diameter 14 (350mm)
- Teeth 70
- (d) Bore 1
- Tooth Grind 4&1
- Hook Angle 15
- Kerf (B) .150 (3.8mm)
- Plate (C) .110 (2.8mm)
