Bug-O GO-FER IV Track Cutting and Welding Carriage
The GO-FER IV is a portable, versatile and robusttractor designed for all your cutting and weldingneeds. Its like having three units in one! When used for cutting, you can utilize either oxy-fuel or plasmatorches. It can also carry a Plasma torch for gouging.
The GO-FER IV can be used in all positions. The system includes rack & pinion drive and the wheels are secured within the V groove in the sides of the rail. These features allow travel in any plane, even upside down.
When utilized for straight line cutting and beveling with an oxy-fuel torch, this unit includes everything required except the torch itself. The torch holder will accept any standard 1-3/8″ (35mm) diameter machine torch with a 32 pitch gear rack. The quick-action gas manifold mounted to the rear of the machine is used as a strain reliever for the torch hoses and gives the operator the ability to turn the gases on and off
without having to readjust the gas flow of the torch. The Cable Anchor provides strain relief for the supply hoses and power cord.
With an ample speed range of 2.5-100 IPM (63.5 -2540 MM/MIN) and direct rack and pinion drive, the GO-FER IV is perfectly designed to work in conjunction with a plasma cutting system. The GOFER IV includes a built-in contactor switch to turn the plasma on and off. Easy torch adjustment is provided to make straight plasma cuts and bevels.
With the right tip in the plasma torch you can perform mechanized gouging without changing machines.
- Bug-O Part Number: GOF-4001
- Stocked at CWS warehouse in non-CSA versions, certification available at additional cost, please contact us for more information. [email protected]
Package Contents – GO-FER IV Systems
Go-Fer IV Product Brochure | All Bug-O Products
